{"title":"Zinsser","description":null,"products":[{"product_id":"zinsser-allcoat-r-exterior-black-2-5-litre","title":"Zinsser AllCoat® Exterior Black 2.5 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 2.5 litre\u003cbr\u003eColour: Black\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489360463,"sku":"TLB-ZINACEBK25L","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEBK25L.webp?v=1721745025"},{"product_id":"zinsser-allcoat-r-exterior-anthracite-2-5-litre","title":"Zinsser AllCoat® Exterior Anthracite 2.5 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 2.5 litre\u003cbr\u003eColour: Anthracite\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489393231,"sku":"TLB-ZINACEAN25L","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEAN25L_328919fe-2bf0-4a86-b675-5fa1dd33b9ac.webp?v=1721745025"},{"product_id":"zinsser-allcoat-r-exterior-black-1-litre","title":"Zinsser AllCoat® Exterior Black 1 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 1 litre\u003cbr\u003eColour: Black\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489425999,"sku":"TLB-ZINACEBK1L","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEBK1L.webp?v=1721745026"},{"product_id":"zinsser-allcoat-r-exterior-anthracite-1-litre","title":"Zinsser AllCoat® Exterior Anthracite 1 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 1 litre\u003cbr\u003eColour: Anthracite\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489458767,"sku":"TLB-ZINACEAN1L","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEAN25L.webp?v=1721745026"},{"product_id":"zinsser-allcoat-r-exterior-white-1-litre","title":"Zinsser AllCoat® Exterior White 1 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 1 litre\u003cbr\u003eColour: White\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489524303,"sku":"TLB-ZINACEWH1L","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEWH1L.webp?v=1721745031"},{"product_id":"zinsser-allcoat-r-exterior-white-2-5-litre","title":"Zinsser AllCoat® Exterior White 2.5 Litre","description":"\u003cp\u003eZinsser AllCoat® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, AllCoat® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.\u003c\/p\u003e\n\u003cp\u003eAllCoat® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllCoat® Exterior will ensure that any exterior looks bright and beautiful for years.\u003c\/p\u003e\n\u003cp\u003eZinsser AllCoat® Exterior gives excellent resistance against:\u003c\/p\u003e\n\u003cp\u003eCracking, blistering and flaking.\u003cbr\u003eRain and severe weather.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eLong lasting finish.\u003cbr\u003eEasy to apply.\u003cbr\u003eExcellent colour retention.\u003cbr\u003eMulti-surface application.\u003c\/p\u003e\n\u003cp\u003eSurfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead.\u003c\/p\u003e\n\u003cp\u003eAvoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser AllCoat® Exterior has the following specification:\u003c\/p\u003e\n\u003cp\u003eSize: 2.5 litre\u003cbr\u003eColour: White\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eShake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489557071,"sku":"TLB-ZINACEWH25L","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINACEWH25L.webp?v=1721745033"},{"product_id":"zinsser-bulls-eye-r-1-2-3-primer-sealer-paint-1-litre","title":"Zinsser Bulls Eye® 1-2-3 Primer \u0026 Sealer Paint 1 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003e10m² per litre.\u003cbr\u003eTouch dry: 35 minutes.\u003cbr\u003eHard dry: 7 days.\u003cbr\u003eRecoatable: 1 hour.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Zinsser BE1231L Bulls Eye® 1-2-3 is supplied in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 1 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489589839,"sku":"TLB-ZINBE1231L","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE1231L.webp?v=1721745035"},{"product_id":"zinsser-bulls-eye-r-1-2-3-primer-sealer-paint-2-5-litre","title":"Zinsser Bulls Eye® 1-2-3 Primer \u0026 Sealer Paint 2.5 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003e10m² per litre.\u003cbr\u003eTouch dry: 35 minutes.\u003cbr\u003eHard dry: 7 days.\u003cbr\u003eRecoatable: 1 hour.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Zinsser BE12325L Bulls Eye® 1-2-3 is supplied in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 2.5 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489655375,"sku":"TLB-ZINBE12325L","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE12325L.webp?v=1721745034"},{"product_id":"zinsser-bulls-eye-r-1-2-3-primer-sealer-paint-500ml","title":"Zinsser Bulls Eye® 1-2-3 Primer \u0026 Sealer Paint 500ml","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003e10m² per litre.\u003cbr\u003eTouch dry: 35 minutes.\u003cbr\u003eHard dry: 7 days.\u003cbr\u003eRecoatable: 1 hour.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Zinsser BE123500 Bulls Eye® 1-2-3 is supplied in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 500ml.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489688143,"sku":"TLB-ZINBE123500","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE123500.webp?v=1721745039"},{"product_id":"zinsser-bulls-eye-r-1-2-3-primer-sealer-paint-white-5-litre","title":"Zinsser Bulls Eye® 1-2-3 Primer \u0026 Sealer Paint White 5 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003e10m² per litre.\u003cbr\u003eTouch dry: 35 minutes.\u003cbr\u003eHard dry: 7 days.\u003cbr\u003eRecoatable: 1 hour.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser Bulls Eye® 1-2-3 Primer \u0026amp; Sealer has the following specification:\u003c\/p\u003e\n\u003cp\u003eColour: White\u003cbr\u003eSize: 5 litre\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489720911,"sku":"TLB-ZINBE1235L","price":102.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE12325L_a66a2e12-e27e-464a-95c4-86e58d400ba4.webp?v=1721745040"},{"product_id":"zinsser-bulls-eye-r-1-2-3-plus-primer-sealer-stain-killer-white-1-litre","title":"Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026 Stain Killer White 1 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains.\u003cbr\u003e\u003cbr\u003eThanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard-to-paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, PVCu, wood, masonry and more.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, ductwork, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job.\u003cbr\u003e\u003cbr\u003eAll of the above benefits combine with ultra-low VOC content, a lightning-quick drying time of just 30 minutes and a 1 hour recoat time.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 Plus can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre\u003cbr\u003eTouch Dry: 35 minutes\u003cbr\u003eHard Dry: 7 days\u003cbr\u003eRecoatable: 1 hour\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026amp; Stain Killer has the following specification:\u003c\/p\u003e\n\u003cp\u003eColour: White\u003cbr\u003eSize: 1 litre\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489753679,"sku":"TLB-ZINBE123P1L","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE123P1L.jpg?v=1721745046"},{"product_id":"zinsser-bulls-eye-r-1-2-3-plus-primer-sealer-stain-killer-white-2-5-litre","title":"Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026 Stain Killer White 2.5 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains.\u003cbr\u003e\u003cbr\u003eThanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard-to-paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, PVCu, wood, masonry and more.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, ductwork, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job.\u003cbr\u003e\u003cbr\u003eAll of the above benefits combine with ultra-low VOC content, a lightning-quick drying time of just 30 minutes and a 1 hour recoat time.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 Plus can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre\u003cbr\u003eTouch Dry: 35 minutes\u003cbr\u003eHard Dry: 7 days\u003cbr\u003eRecoatable: 1 hour\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026amp; Stain Killer has the following specification:\u003c\/p\u003e\n\u003cp\u003eColour: White\u003cbr\u003eSize: 2.5 litre\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489819215,"sku":"TLB-ZINBE123P25L","price":70.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE123P25L.jpg?v=1721745045"},{"product_id":"zinsser-bulls-eye-r-1-2-3-plus-primer-sealer-stain-killer-grey-1-litre","title":"Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026 Stain Killer Grey 1 Litre","description":"\u003cp\u003eZinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains.\u003cbr\u003e\u003cbr\u003eThanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard-to-paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, PVCu, wood, masonry and more.\u003cbr\u003e\u003cbr\u003eBulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, ductwork, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job.\u003cbr\u003e\u003cbr\u003eAll of the above benefits combine with ultra-low VOC content, a lightning-quick drying time of just 30 minutes and a 1 hour recoat time.\u003c\/p\u003e\n\u003cp\u003eBulls Eye® 1-2-3 Plus can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre\u003cbr\u003eTouch Dry: 35 minutes\u003cbr\u003eHard Dry: 7 days\u003cbr\u003eRecoatable: 1 hour\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer \u0026amp; Stain Killer has the following specification:\u003c\/p\u003e\n\u003cp\u003eColour: Grey\u003cbr\u003eSize: 1 litre\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034489884751,"sku":"TLB-ZINBE123PG1L","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBE123PG1L.jpg?v=1721745045"},{"product_id":"zinsser-b-i-n-r-aqua-1-litre","title":"Zinsser B-I-N® Aqua 1 Litre","description":"\u003cp\u003eZinsser B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer combining fast drying times with unrivalled adhesion and best possible coverage.\u003c\/p\u003e\n\u003cp\u003eSeals: tannin, knots, sap streaks, cigar, cigarette \u0026amp; nicotine odours, severe water stains, fire \u0026amp; smoke damage, rust stains, graffiti, crayon, lipstick and grease.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e1 x Zinsser B-I-N® Aqua 1 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490146895,"sku":"TLB-ZINBINA1L","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBINA1L.webp?v=1721745062"},{"product_id":"zinsser-b-i-n-r-aqua-5-litre","title":"Zinsser B-I-N® Aqua 5 Litre","description":"\u003cp\u003eZinsser B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer combining fast drying times with unrivalled adhesion and best possible coverage.\u003c\/p\u003e\n\u003cp\u003eSeals: tannin, knots, sap streaks, cigar, cigarette \u0026amp; nicotine odours, severe water stains, fire \u0026amp; smoke damage, rust stains, graffiti, crayon, lipstick and grease.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e1 x Zinsser B-I-N® Aqua 5 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490277967,"sku":"TLB-ZINBINA5L","price":155.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBINA5L.webp?v=1721745068"},{"product_id":"zinsser-b-i-n-r-aqua-500ml","title":"Zinsser B-I-N® Aqua 500ml","description":"\u003cp\u003eZinsser B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer combining fast drying times with unrivalled adhesion and best possible coverage.\u003c\/p\u003e\n\u003cp\u003eSeals: tannin, knots, sap streaks, cigar, cigarette \u0026amp; nicotine odours, severe water stains, fire \u0026amp; smoke damage, rust stains, graffiti, crayon, lipstick and grease.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e1 x Zinsser B-I-N® Aqua 500ml.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490310735,"sku":"TLB-ZINBINA500","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINBINA500.webp?v=1721745068"},{"product_id":"zinsser-ceiling-pro-5-in-1-2-5-litre","title":"Zinsser Ceiling Pro 5-in-1 2.5 Litre","description":"\u003cp\u003eZinsser Ceiling Pro 5-in-1 is based on ground-breaking paint technology that effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke), primes and finishes whilst bridging hairline cracks.\u003c\/p\u003e\n\u003cp\u003eIn addition Ceiling Pro 5-in-1 contains a biocide that protects the dried coating against fungal degradation, prolonging the life of the painted ceiling. These outstanding features combine with a 1 hour recoat time, low odour and ultra low VOC content.\u003c\/p\u003e\n\u003cp\u003eSuitable for both bare and previously painted ceilings.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490409039,"sku":"TLB-ZINCP5125L","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINCP5125L.webp?v=1721745075"},{"product_id":"zinsser-gardz-r-sealer-primer-1-litre","title":"Zinsser Gardz® Sealer Primer 1 Litre","description":"\u003cp\u003eZinsser Gardz® Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste.\u003c\/p\u003e\n\u003cp\u003eGardz® Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water.\u003c\/p\u003e\n\u003cp\u003eRecommended Uses:\u003c\/p\u003e\n\u003cp\u003eDamaged Drywall: prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering.\u003c\/p\u003e\n\u003cp\u003eNew Drywall \/ Joint Compound and Spackling: new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future.\u003c\/p\u003e\n\u003cp\u003ePlaster: freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface.\u003c\/p\u003e\n\u003cp\u003eCalcimine: is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath.\u003c\/p\u003e\n\u003cp\u003eWallpaper Adhesive Residue: water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes.\u003c\/p\u003e\n\u003cp\u003eTexture and Popcorn Finishes: Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath.\u003c\/p\u003e\n\u003cp\u003eOld Wallpaper: most of the wallpaper installed before the 1960’s was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface.\u003c\/p\u003e\n\u003cp\u003ePre-Wallcovering Primer: penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off.\u003c\/p\u003e\n\u003cp\u003eBuilder’s Flat Paint: penetrates chalky, builder’s flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Gardz® Sealer Primer 1 litre\u003c\/p\u003e\n\u003cp\u003eColour: Clear.\u003cbr\u003eSize 1 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490835023,"sku":"TLB-ZINGS1L","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINGS1L.webp?v=1721745093"},{"product_id":"zinsser-gardz-r-sealer-primer-500ml","title":"Zinsser Gardz® Sealer Primer 500ml","description":"\u003cp\u003eZinsser Gardz® Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste.\u003c\/p\u003e\n\u003cp\u003eGardz® Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water.\u003c\/p\u003e\n\u003cp\u003eRecommended Uses:\u003c\/p\u003e\n\u003cp\u003eDamaged Drywall: prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering.\u003c\/p\u003e\n\u003cp\u003eNew Drywall \/ Joint Compound and Spackling: new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future.\u003c\/p\u003e\n\u003cp\u003ePlaster: freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface.\u003c\/p\u003e\n\u003cp\u003eCalcimine: is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath.\u003c\/p\u003e\n\u003cp\u003eWallpaper Adhesive Residue: water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes.\u003c\/p\u003e\n\u003cp\u003eTexture and Popcorn Finishes: Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath.\u003c\/p\u003e\n\u003cp\u003eOld Wallpaper: most of the wallpaper installed before the 1960’s was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface.\u003c\/p\u003e\n\u003cp\u003ePre-Wallcovering Primer: penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off.\u003c\/p\u003e\n\u003cp\u003eBuilder’s Flat Paint: penetrates chalky, builder’s flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Gardz® Sealer Primer 1 litre\u003c\/p\u003e\n\u003cp\u003eColour: Clear.\u003cbr\u003eSize 500ml.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490867791,"sku":"TLB-ZINGS500","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINGS500.webp?v=1721745094"},{"product_id":"zinsser-peel-stop-r-clear-binding-primer-paint-1-litre","title":"Zinsser Peel Stop® Clear Binding Primer Paint 1 Litre","description":"\u003cp\u003eZinsser's Peel Stop® is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates.\u003cbr\u003ePeel Stop® tightly bonds to old paint and problem areas forming a sound surface for new paint. It forms a tough acrylic film staying flexible and helps prevent peeling by letting moisture escape.\u003c\/p\u003e\n\u003cp\u003eRecommended uses:\u003cbr\u003ePeel Stop® prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanised gutters.\u003cbr\u003e\u003cbr\u003eCan be applied via airless sprayer, brush or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 7.4 to 98m² per litre.\u003cbr\u003eTouch dry: 1 hour.\u003cbr\u003eHard dry: 7 - 10 days.\u003cbr\u003eRecoat able: 2 hours.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490900559,"sku":"TLB-ZINPSP1L","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINPSP1L.webp?v=1721745094"},{"product_id":"zinsser-perma-white-r-interior-paint-matt-1-litre","title":"Zinsser Perma-White® Interior Paint Matt 1 Litre","description":"\u003cp\u003ePerma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.\u003c\/p\u003e\n\u003cp\u003ePerma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.\u003c\/p\u003e\n\u003cp\u003ePerma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre.\u003cbr\u003eTouch dry: 30 minutes.\u003cbr\u003eHard dry: 7-10 days.\u003cbr\u003eRecoatable: 2 hours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.\u003c\/p\u003e\n\u003cp\u003eZINPWES1L comes in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 1 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034490933327,"sku":"TLB-ZINPWES1L","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINPWES1L.webp?v=1721745095"},{"product_id":"zinsser-perma-white-r-interior-paint-matt-2-5-litre","title":"Zinsser Perma-White® Interior Paint Matt 2.5 Litre","description":"\u003cp\u003ePerma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.\u003c\/p\u003e\n\u003cp\u003ePerma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.\u003c\/p\u003e\n\u003cp\u003ePerma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre.\u003cbr\u003eTouch dry: 30 minutes.\u003cbr\u003eHard dry: 7-10 days.\u003cbr\u003eRecoatable: 2 hours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.\u003c\/p\u003e\n\u003cp\u003eZINPWES25L comes in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 2.5 litre.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034491031631,"sku":"TLB-ZINPWES25L","price":50.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINPWES25L.webp?v=1721745101"},{"product_id":"zinsser-perma-white-r-interior-paint-satin-1-litre","title":"Zinsser Perma-White® Interior Paint Satin 1 Litre","description":"\u003cp\u003ePerma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.\u003c\/p\u003e\n\u003cp\u003ePerma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.\u003c\/p\u003e\n\u003cp\u003ePerma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre.\u003cbr\u003eTouch dry: 30 minutes.\u003cbr\u003eHard dry: 7-10 days.\u003cbr\u003eRecoatable: 2 hours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Perma-White® Interior Satin Paint is recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.\u003c\/p\u003e\n\u003cp\u003eZINPWIS1L comes in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 1 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034491064399,"sku":"TLB-ZINPWIS1L","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINPWIS1L.webp?v=1721745102"},{"product_id":"zinsser-perma-white-r-interior-paint-satin-2-5-litre","title":"Zinsser Perma-White® Interior Paint Satin 2.5 Litre","description":"\u003cp\u003ePerma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.\u003c\/p\u003e\n\u003cp\u003ePerma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.\u003c\/p\u003e\n\u003cp\u003ePerma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.\u003c\/p\u003e\n\u003cp\u003eApplication information:\u003cbr\u003eCoverage: 10m² per litre.\u003cbr\u003eTouch dry: 30 minutes.\u003cbr\u003eHard dry: 7-10 days.\u003cbr\u003eRecoatable: 2 hours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZinsser Perma-White® Interior Satin Paint is recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.\u003c\/p\u003e\n\u003cp\u003eZINPWIS25L comes in the following:\u003cbr\u003eContainer type: Tin.\u003cbr\u003eVolume: 2.5 litre.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":42034491097167,"sku":"TLB-ZINPWIS25L","price":50.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2728\/6638\/files\/ZINPWIS25L.webp?v=1721745103"}],"url":"https:\/\/au.gsworkwear.com\/collections\/zinsser.oembed","provider":"GS Workwear","version":"1.0","type":"link"}